• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why Buy a 10kg Front Loader?

The front-loader 10kg is ideal for large loads of laundry with 13 wash programs including handwash, and plenty of space to accommodate large wash cycles. With smart tech and advanced features, it's the ideal partner for home laundry.

Front loaders generally take longer to wash, and aren't available in larger capacities, and 023456789.xyz often be prone to mould and mildew. However, 023456789.xyz they are more efficient in water and energy than top loaders.

Energy

The primary energy cost of front-loaders is the power that is used to heat the water to operating temperature and run motor. These costs can be offset with lower operational energy consumption compared with top-loaders, notably less power during the agitation cycle and during spin, and less water. Certain machines have low-water cycles that use less water than the cotton cycle. This can save energy and water.

In general, front-load washers use less detergent than top-loaders and the tumbling action in the drum entrains air which reduces foamy suds and overflows without affecting the cleaning process. However the door seals as well as bellows are more susceptible to wear than the bellows in top-loaders. In addition, a top-loader's mechanical agitator could cause considerable wear and abrasion to fabrics for clothing, since it presses clothes against one other with paddles that are constantly dropping and dragging them through the wash. This abrasion is measured by the amount of fabric that is left on the lint screen, as lint is mostly composed of stray fibers separated from clothing during drying and washing. A lot of top-loaders are designed to operate at lower speeds and can also have the "freshening cycle" to clean the bellows or mechanical gears regularly.

Water

Top-loading washers require an impeller or an agitator to force soap and water through the clothing, causing wear and abrasion. Front-loaders on the other hand make use of paddles to gently lift and drop clothes into a spinning drum during cleaning, which reduces wear. The rate of wear can be estimated by the amount of lint accumulated in dryer lint filtering systems, which is mostly composed of threads that have escaped from clothes when drying and washing.

Because front-load machines require less water than top-loaders, they are less prone to leakage. True front-loaders may require a bellows or seal to prevent water from getting out of the door during operation, however these systems usually do not need to be maintained at the same frequency as their counterparts on top-loaders.

Additionally, front-loaders can operate with cold water or hot and a majority of them without the need for www.023456789.Xyz an external heating source, making them more energy efficient than top-load machines. This efficiency can cut down on the cost of running the same laundry load, especially in areas where water, detergent, 023456789.xyz and Www.023456789.Xyz energy are expensive.