• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

upvc window repair repairs can save homeowners money and keep their homes comfortable. Window replacement is often required in the event of severe damage, such as broken glass or a broken window frame.

Other issues are fixable to extend the lifespan of windows. Common issues include:

Cracked or broken Panes

Glass that is cracked can be caused by a lawnmowers who throws rocks in the wrong direction or branches of trees being blown by strong winds. This is not only visually terrible, but it could result in higher energy bills because the broken pieces allow cold air into your house. It's fairly simple to repair windows that have broken panes.

Begin by carefully removing the glass using gloves and sunglasses. You may need to use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to wipe the surface of the glass and the frame's wood.

After cleaning the area, apply silicone caulking that is water-proof to the frame's perimeter. This will stop water from getting into the frame through the crack and causing further damage.

If you have double-pane glass, a bad crack could compromise the gas layer that lies between the panes, making your windows less insulative. If the crack is so extensive that it is threatening the structural integrity of the window or the pane inside is not there it is possible to consult an expert.

Thermal stress cracks may also occur when there is an extreme temperature difference inside and outside your home. This causes the glass to expand and shrink. If this happens to two parts of a window it's best to replace the window rather than trying to repair it.

For windows that have cracked but aren't quite ready to be replaced clear tape can do a great job of securing the crack and keeping out bugs and cold air. You can cut a piece of nylon stocking or tarp large enough to cover the crack and glue it in place with duct tape. It's not a solution that will last forever however it's a great solution in a pinch and it keeps insects and cold air from entering your home. If you notice cracks or blemishes on your windows that are older, you should check with your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is one of the most common problems with windows. It can ruin a house's appearance and pose a safety danger. It is possible to repair damaged wood. First, you will need to ensure that the source of the rot has been addressed. Examine for leaks in the roof and other places where water could get into the wood.

The next step is to remove any rotten areas of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After the rotten areas have been eliminated then you must replace them with fresh wood. Pre-treated wood is recommended for this project, as it will resist decay. If you are not able to replace the wood damaged by rot then you can use wood hardener or filler to strengthen the damaged area. Many hardware stores will carry this type of product. To achieve the best results, adhere to the instructions on the product label.

After you have replaced the rotten areas of the windowsill, it is crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. A product such as Sikkens is a great choice for this task.

Make use of a two-part epoxy to protect the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is important to follow the directions on the label. After the epoxy filler dries, you can sand down the surface of the wooden. It is recommended to begin with a rough piece of sandpaper before moving to a smoother one.

You don't want to expose your rotted part to more moisture. Therefore, it is an ideal idea to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. Then, you can reapply waterproof wood sealant.

The W won't let you open

There are many reasons windows won't open. Wood frames can warp in rainy weather, or the house could have settled or someone could have nailed it shut for security reasons. With a little patience and the right tools you can open most stuck windows.

Accumulated debris or gunk could be the main cause of windows that aren't opening. Grime and dirt build up on the sliding tracks, hinges, and locks over time, notes Acme Glass. Additionally, hardware made of metal may get rusty when in contact with humidity or direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent corrosion and keep your window operating properly.

Stuck windows could also be the result of an unintentional break or loosening of the pulleys used to raise and lower the window. These components can lose their tension and cause obstruction, especially if the window is located two or more stories above the ground.

If you have trouble opening a door, you can use a pry-bar to gently open the door. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the reason for a window that won't lift or lower. You will need to consult your owner's guide for more information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they still won’t open, then it may be time to replace the windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let windows in your home go from being functional to unusable. A window that isn’t properly closed could expose your home to burglary and water damages. Contact our team today for more information about our replacement windows and our services!