• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However when windows with double panes are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation you'll need source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you plan to attempt to remove the window panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is significant, you may prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window repair and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze, it may be hinges at the fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It is very easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to give assistance.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges can also become misaligned due to wear, creating an opening where the sash meets frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it is possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.