• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an auto locksmith or Subaru dealer, based on how old your Subaru is. This is done by connecting a computer-based programming machine to your vehicle.

To program your Subaru to program, open the door on the driver's side by pressing the door button and then close it. You will hear a chime in the instrument panel and the dome lights will flash.

Step 1: Find the circuit board for your transmitter

There are many ways to program your key fob. First, you must determine the type of key fob that you own. This can be accomplished by examining the shape of the key fob or by listening to the buzz in your car.

Once you have the information, you can begin the process of programming your keyfob from home. You'll require an flathead and a steel key to complete this. You can open the key fob by twisting it. Then push the key in and pull the battery from the tiny tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Disconnect the key fob case

It is an ideal idea to change the battery in key fobs if they are not working. However, there are situations where the buttons on the key fob might be broken. If you are able to see that the buttons' contacts made of metal have become loose, you can try soldering them back in place to get them working again.

Before you begin the process, ensure your vehicle's doors are closed and that your ignition is turned off. Close the driver's side doors and then press the door button 10 times in rapid succession. You'll then hear the instrument panel chime, and your dome light should flash. This indicates that you are ready to move on.

Step 3: Insert the Key Fob in the Ignition

A lot of articles on the internet will tell you how to program your brand new or replacement Subaru keyfob at home. However, many of them don't offer very specific instructions. Reprogramming an electronic key is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors shut and the engine turned off. Open the door button control and use it to unlock all doors. Open and close the driver's door two times more. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system will sound a chirp when the settings are altered.

Step 4 4. Turn on the ignition.

Before you begin this process of programming your key fob, it is important to keep in mind that this process only works if you own one working key already. If you don't then a dealer or auto locksmith will be required to program a brand new key for your subaru remote key in Fort Bliss.

After the key is programmed, it should be in a position to start your vehicle within a matter of five seconds. Start by closing the doors and then shutting off the engine. Sit in the driver's chair and unlock the doors by pressing the door button. Insert the key in the ignition and then turn it to the first position. The electrical systems will be activated, however the engine will remain in neutral. Repeat this procedure ten times.

Step 5: Unlock Driver's Door

Subaru has a broad selection of high-end vehicles with key fobs which can lock and unlock doors as well as start the car and defrost the windows. However, there are times when these devices fail to function properly.

To resolve this issue to resolve the issue, you should call a locksmith or a dealer. This will resolve the issue and ensure that your vehicle is safe.

It is necessary to first open and close the door on the driver's side. Place the key into the ignition and then turn it to position 1. Then, turn it back to the off position. Do this as quickly as you can for ten times. After ten times, you will hear a chime.

Step 6: Press the Lock/Unlock button on the Driver's Door

If you need to replace the battery in the Subaru impreza key replacement key fob, the process is easy. Remove the fob's exterior case. Then, use an flathead screwdriver, to pry open the inside of the case and take out the old battery.

After taking the battery out to replace it, you can replace it with the new one. Close the case. Sit in the driver's chair and open all doors using the door-button control. Put the key in the ignition and turn the key so that the electric system is turned on, but the engine is off. Repeat this 10 times in a row until you hear the chime on the instrument panel. This will put the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The annoying chirp that can be heard when locking or unlocking the Subaru Key Fob from outside of the vehicle can be very distracting for some owners. In some cases you can deactivate the sound by shutting and opening all doors while double-clicking lock button on the key fob.

Close all doors including the fuel-filler lid and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is achieved. The chime signals that the fuel-filler lid and door lid are locked. It is possible to change the setting to make the doors are locked automatically without pressing a button.

Step 8: Enter the 8-Digit Transmitter Number.

Keep the first 8-digits in your mind. Now, climb into your driver's seat. Close all of the doors, and then turn the key back to the first position (towards on). After ten turns your instrument panel should begin to sound once.

The circuit board for the transmitter is inside the key fob's case. The circuit board should contain one or two 8-digit numbers. Follow the steps in the guide to register the code. This may require visiting the dealer for older models.