• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that will assist the new pane to fit properly into the frame of the window repair near me.

If you plan to try to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the distance between the window and the door is significant, you may need to consider a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how serious the issue is, old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is simpler with someone else to help hold the frame in place.

Make sure that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation at the factory. Sending us photos through our website can often resolve the problem. We are more than happy to offer suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window repairs.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, which can cause an opening where the sash and frame meet. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window repairs, may also become misaligned, again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc window repairs with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.